All That Dancin' (Extended Mix)
30s preview
- BPM
- 125
- Open Key
- 3m
- Energy
- 97/100
- Pop
- 5/100
- Length
- 6:12
- Released
- 2018
- Genre
- Tech House
- Loudness
- -6.7 dB
- Dynamics
- 13.2 dB
- ISRC
- GBPQS1800051
Key, BPM and audio features: model-based audio analysis · how we measure · catalogue updated July 2026
All That Dancin' (Extended Mix): club-tempo tech house, B minor (10A), 125 BPM. Tonally it lands punchy, neutral in mood. Rhythmically it is built for the dancefloor. The mix is almost entirely instrumental. Its spectrum is weighted to the sub and kick, with a heavy low end. The master keeps unusual dynamic range for club music (crest 13 dB). A 2018 production that still circulates in sets. Hotter than 82% of Danny Howard's catalogue. In a set it works best as a peak-time weapon.
Sonic profile
Frequency spectrum
amplitude · bass → treble
- 35%
- Low
- 30-130 Hz
- 28%
- Low-mid
- 130-570 Hz
- 19%
- Upper-mid
- 570 Hz-2.5 kHz
- 18%
- High
- 2.5-11 kHz
FAQ
What key is All That Dancin' (Extended Mix) in?
All That Dancin' (Extended Mix) by Danny Howard is in B minor, or 10A on the Camelot wheel.
What BPM is All That Dancin' (Extended Mix)?
All That Dancin' (Extended Mix) runs at 125 BPM, a club-tempo track.
What mixes well with All That Dancin' (Extended Mix)?
From 10A it blends harmonically with 11A, 10B, 9A. Moving to 11A lifts the energy a step.
Is All That Dancin' (Extended Mix) good for peak time?
With energy 97 out of 100 at 125 BPM, it works best as a peak-time weapon.
Mixes harmonically
10A → 9A · 11A · 10BFrom 10A, 11A (F♯ minor) lifts the energy a step; 10B (D major) brightens to the relative major; 9A (E minor) cools the energy down a step.
How to mix it
In 10A at 125 BPM: 11A (F♯ minor) — move to 11A to push the floor harder; 10B (D major) — switch to 10B for a mood change without losing the groove; 9A (E minor) — drop to 9A to bring the room down gently.
Pitch range at ±6%: 117-133 BPM — anything in that window beatmatches without sounding stretched.
Key on the fader: without key lock (Master Tempo on CDJs), above roughly +5% it plays a semitone higher, so treat it as 5A rather than 10A; below -5% it reads as 3A. With key lock on, it stays 10A across the whole range.
Programming: a peak-time weapon — save it for the main stretch (energy 97/100).
Similar tempo
Within ±3 BPM of 125 — beatmatch without a big tempo pull.
More tech house
More from Danny Howard
Full profile
Other recommendations
Beyond strict key and genre matches: tracks that still sit in beatmatch range of 125 BPM with a compatible energy and groove — candidates for a key jump or a genre crossover.
Every insight on this page, for your own library.
Vibes runs this same analysis on the music you own: keys, energy and vibe for every track, organized into sets you can actually play.